# clone F-Stack mkdir -p /data/f-stack git clone https://github.com/F-Stack/f-stack.git /data/f-stack # Install libnuma-dev yum install numactl-devel # on Centos #sudo apt-get install libnuma-dev # on Ubuntu pip3 install pyelftools --upgrade # Install python and modules for running DPDK python scripts pip3 install pyelftools --upgrade # RedHat/Centos sudo apt install python # On ubuntu #sudo pkg install python # On FreeBSD # Install dependencies (FreeBSD only) #pkg install meson pkgconf py38-pyelftools cd f-stack # Compile DPDK cd dpdk/ meson -Denable_kmods=true build ninja -C build ninja -C build install
meson编译报错， 找不到内核源码： ERROR: Command "/usr/bin/make -sC /lib/modules/5.4.210-1.el7.elrepo.x86_64/build kernelversion" failed with status 2 yum install kernel-devel-$(uname -r) # Set hugepage (Linux only) # single-node system echo 1024 > /sys/kernel/mm/hugepages/hugepages-2048kB/nr_hugepages # or NUMA (Linux only) echo 1024 > /sys/devices/system/node/node0/hugepages/hugepages-2048kB/nr_hugepages echo 1024 > /sys/devices/system/node/node1/hugepages/hugepages-2048kB/nr_hugepages # Using Hugepage with the DPDK (Linux only) mkdir /mnt/huge mount -t hugetlbfs nodev /mnt/huge # Close ASLR; it is necessary in multiple process (Linux only) echo 0 > /proc/sys/kernel/randomize_va_space # Offload NIC # For Linux: modprobe uio insmod /data/f-stack/dpdk/build/kernel/linux/igb_uio/igb_uio.ko insmod /data/f-stack/dpdk/build/kernel/linux/kni/rte_kni.ko carrier=on # carrier=on is necessary, otherwise need to be up `veth0` via `echo 1 > /sys/class/net/veth0/carrier` python dpdk-devbind.py --status ifconfig eth0 down python dpdk-devbind.py --bind=igb_uio eth0 # assuming that use 10GE NIC and eth0 # For FreeBSD: # Refer DPDK FreeBSD guide to set tunables in /boot/loader.conf # Below is an example used for our testing machine #echo "hw.nic_uio.bdfs=\"2:0:0\"" >> /boot/loader.conf #echo "hw.contigmem.num_buffers=1" >> /boot/loader.conf #echo "hw.contigmem.buffer_size=1073741824" >> /boot/loader.conf #kldload contigmem #kldload nic_uio # On Ubuntu, use gawk instead of the default mawk. #sudo apt-get install gawk # or execute `sudo update-alternatives --config awk` to choose gawk. # Install dependencies for F-Stack sudo apt install gcc make libssl-dev # On ubuntu #sudo pkg install gcc gmake openssl pkgconf libepoll-shim # On FreeBSD # Upgrade pkg-config while version < 0.28 #cd /data #wget https://pkg-config.freedesktop.org/releases/pkg-config-0.29.2.tar.gz #tar xzvf pkg-config-0.29.2.tar.gz #cd pkg-config-0.29.2 #./configure --with-internal-glib #make #make install #mv /usr/bin/pkg-config /usr/bin/pkg-config.bak #ln -s /usr/local/bin/pkg-config /usr/bin/pkg-config # Compile F-Stack export FF_PATH=/data/f-stack export PKG_CONFIG_PATH=/usr/lib64/pkgconfig:/usr/local/lib64/pkgconfig:/usr/lib/pkgconfig cd /data/f-stack/lib/ make # On Linux #gmake # On FreeBSD # Install F-STACK # libfstack.a will be installed to /usr/local/lib # ff_*.h will be installed to /usr/local/include # start.sh will be installed to /usr/local/bin/ff_start # config.ini will be installed to /etc/f-stack.conf make install # On Linux #gmake install # On FreeBSD