526互联

01-[Linux][Regulator]使用LDO编程示例

发布时间 2023-08-01 16:37:34作者: 596

1、在驱动代码中使用LDO供电操作的步骤如下：

  • 找到需要操作的LDO名字，如MTK平台：vio28
  • 在dts中找到相应的节点，如下所示：
mt_pmic_vio28_ldo_reg: ldo_vio28 {
	regulator-name = "vio28";
	regulator-min-microvolt = <2800000>;
	regulator-max-microvolt = <2800000>;
	regulator-enable-ramp-delay = <264>;
};
  • 在设备树中自己定义的节点中引用上述节点：
ldo_sample: ldo_sample {
	compatible = "mediatek,ldo_sample";
	ldo_sample-supply = <&mt_pmic_vio28_ldo_reg>;
	status = "okay";
};
  • 编写驱动代码，使用devm_regulator_get，regulator_enable，regulator_disable等接口来进行操作LDO

2、驱动示例代码如下：

#include <linux/init.h>
#include <linux/module.h>
#include <linux/ioctl.h>
#include <linux/fs.h>
#include <linux/delay.h>
#include <linux/device.h>
#include <linux/err.h>
#include <linux/list.h>
#include <linux/errno.h>
#include <linux/mutex.h>
#include <linux/slab.h>
#include <linux/compat.h>
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/acpi.h>
#include <linux/regulator/consumer.h>

struct ldo_sample_dev {
	struct regulator *vcc;
};
struct ldo_sample_dev *pldo;


static ssize_t show_ldo_val(struct device *dev,
		struct device_attribute *attr, char *buf)
{
	return 0;
}

static ssize_t store_ldo_val(struct device *dev,
		struct device_attribute *attr, const char *buf, size_t count)
{
	int val = 0;
  
  	if (kstrtoint(buf, 10, &val))
  		return -EINVAL;

	pr_err("596 store_ldo_val val=%d\n", val);

	if (val == 1) {
		regulator_enable(pldo->vcc);
	} else {
		regulator_disable(pldo->vcc);
	}

	return count;
}

static DEVICE_ATTR(ldo_sample, 0664, show_ldo_val, store_ldo_val);

static int ldo_sample_probe(struct platform_device *pdev)
{
	int err = 0;

	pr_info("596 %s enter.\n", __func__);
	/* 1. alloc memory */
	pldo = devm_kzalloc(&pdev->dev, sizeof(*pldo), GFP_KERNEL);
	if (!pldo)
		return -ENOMEM;

	/* 2. get regulator */
	pldo->vcc = devm_regulator_get(&pdev->dev, "ldo_sample");
	if (IS_ERR(pldo->vcc)) {
		err = PTR_ERR(pldo->vcc);
		pr_err("596 regulator request failed (%d)\n", err);
		return err;
	}

	/* 3. create device attr */
	device_create_file(&(pdev->dev), &dev_attr_ldo_sample);

	pr_info("596 %s exit.\n", __func__);
	
	return 0;
}

static int ldo_sample_remove(struct platform_device *pdev)
{
	pr_info("596 %s enter\n", __func__);
	
	return 0;
}

const struct of_device_id ldo_sample_table[] = {
	{ .compatible = "mediatek,ldo_sample" },
	{}
};

static struct platform_driver ldo_sample_driver = {
	.probe = ldo_sample_probe,
	.remove = ldo_sample_remove,
	.driver = {
		.name = "ldo_sample",
		.of_match_table = ldo_sample_table,
	},
};

module_platform_driver(ldo_sample_driver);

MODULE_AUTHOR("596");
MODULE_DESCRIPTION("Mediatek LDO driver sample");
MODULE_LICENSE("GPL");