JavaWeb - Day10 - 案例 - 部门管理、员工管理

发布时间 2023-12-19 17:35:27作者: 小王子C

01. 案例-准备工作

需求&环境搭建

1、部门管理

部门管理功能开发包括:

  • 查询部门列表

  • 删除部门

  • 新增部门

  • 修改部门

2、员工管理

员工管理功能开发包括:

  • 查询员工列表(分页、条件)

  • 删除员工

  • 新增员工

  • 修改员工

环境搭建

步骤:

  1. 准备数据库表(dept、emp)

  2. 创建springboot工程,引入对应的起步依赖(web、mybatis、mysql驱动、lombok)

  3. 配置文件application.properties中引入mybatis的配置信息,准备对应的实体类

  4. 准备对应的Mapper、Service(接口、实现类)、Controller基础结构

第1步:准备数据库表

-- 部门管理
create table dept(
    id int unsigned primary key auto_increment comment '主键ID',
    name varchar(10) not null unique comment '部门名称',
    create_time datetime not null comment '创建时间',
    update_time datetime not null comment '修改时间'
) comment '部门表';
-- 部门表测试数据
insert into dept (id, name, create_time, update_time) values(1,'学工部',now(),now()),(2,'教研部',now(),now()),(3,'咨询部',now(),now()), (4,'就业部',now(),now()),(5,'人事部',now(),now());



-- 员工管理(带约束)
create table emp (
  id int unsigned primary key auto_increment comment 'ID',
  username varchar(20) not null unique comment '用户名',
  password varchar(32) default '123456' comment '密码',
  name varchar(10) not null comment '姓名',
  gender tinyint unsigned not null comment '性别, 说明: 1 男, 2 女',
  image varchar(300) comment '图像',
  job tinyint unsigned comment '职位, 说明: 1 班主任,2 讲师, 3 学工主管, 4 教研主管, 5 咨询师',
  entrydate date comment '入职时间',
  dept_id int unsigned comment '部门ID',
  create_time datetime not null comment '创建时间',
  update_time datetime not null comment '修改时间'
) comment '员工表';
-- 员工表测试数据
INSERT INTO emp
    (id, username, password, name, gender, image, job, entrydate,dept_id, create_time, update_time) VALUES
    (1,'jinyong','123456','金庸',1,'1.jpg',4,'2000-01-01',2,now(),now()),
    (2,'zhangwuji','123456','张无忌',1,'2.jpg',2,'2015-01-01',2,now(),now()),
    (3,'yangxiao','123456','杨逍',1,'3.jpg',2,'2008-05-01',2,now(),now()),
    (4,'weiyixiao','123456','韦一笑',1,'4.jpg',2,'2007-01-01',2,now(),now()),
    (5,'changyuchun','123456','常遇春',1,'5.jpg',2,'2012-12-05',2,now(),now()),
    (6,'xiaozhao','123456','小昭',2,'6.jpg',3,'2013-09-05',1,now(),now()),
    (7,'jixiaofu','123456','纪晓芙',2,'7.jpg',1,'2005-08-01',1,now(),now()),
    (8,'zhouzhiruo','123456','周芷若',2,'8.jpg',1,'2014-11-09',1,now(),now()),
    (9,'dingminjun','123456','丁敏君',2,'9.jpg',1,'2011-03-11',1,now(),now()),
    (10,'zhaomin','123456','赵敏',2,'10.jpg',1,'2013-09-05',1,now(),now()),
    (11,'luzhangke','123456','鹿杖客',1,'11.jpg',5,'2007-02-01',3,now(),now()),
    (12,'hebiweng','123456','鹤笔翁',1,'12.jpg',5,'2008-08-18',3,now(),now()),
    (13,'fangdongbai','123456','方东白',1,'13.jpg',5,'2012-11-01',3,now(),now()),
    (14,'zhangsanfeng','123456','张三丰',1,'14.jpg',2,'2002-08-01',2,now(),now()),
    (15,'yulianzhou','123456','俞莲舟',1,'15.jpg',2,'2011-05-01',2,now(),now()),
    (16,'songyuanqiao','123456','宋远桥',1,'16.jpg',2,'2007-01-01',2,now(),now()),
    (17,'chenyouliang','123456','陈友谅',1,'17.jpg',NULL,'2015-03-21',NULL,now(),now());

第2步:创建一个SpringBoot工程,选择引入对应的起步依赖(web、mybatis、mysql驱动、lombok) (版本选择2.7.5版本,可以创建完毕之后,在pom.xml文件中更改版本号)

生成的pom.xml文件:

<?xml version="1.0" encoding="UTF-8"?>
<project xmlns="http://maven.apache.org/POM/4.0.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
         xsi:schemaLocation="http://maven.apache.org/POM/4.0.0 https://maven.apache.org/xsd/maven-4.0.0.xsd">
    <modelVersion>4.0.0</modelVersion>
    <parent>
        <groupId>org.springframework.boot</groupId>
        <artifactId>spring-boot-starter-parent</artifactId>
        <version>2.7.5</version>
        <relativePath/> 
    </parent>
    <groupId>com.itheima</groupId>
    <artifactId>tlias-web-management</artifactId>
    <version>0.0.1-SNAPSHOT</version>
    <name>tlias-web-management</name>
    <description>Demo project for Spring Boot</description>
    <properties>
        <java.version>11</java.version>
    </properties>
    <dependencies>
        <dependency>
            <groupId>org.springframework.boot</groupId>
            <artifactId>spring-boot-starter-web</artifactId>
        </dependency>
        <dependency>
            <groupId>org.mybatis.spring.boot</groupId>
            <artifactId>mybatis-spring-boot-starter</artifactId>
            <version>2.3.0</version>
        </dependency>

        <dependency>
            <groupId>com.mysql</groupId>
            <artifactId>mysql-connector-j</artifactId>
            <scope>runtime</scope>
        </dependency>
        <dependency>
            <groupId>org.projectlombok</groupId>
            <artifactId>lombok</artifactId>
            <optional>true</optional>
        </dependency>
        <dependency>
            <groupId>org.springframework.boot</groupId>
            <artifactId>spring-boot-starter-test</artifactId>
            <scope>test</scope>
        </dependency>
    </dependencies>

    <build>
        <plugins>
            <plugin>
                <groupId>org.springframework.boot</groupId>
                <artifactId>spring-boot-maven-plugin</artifactId>
                <configuration>
                    <excludes>
                        <exclude>
                            <groupId>org.projectlombok</groupId>
                            <artifactId>lombok</artifactId>
                        </exclude>
                    </excludes>
                </configuration>
            </plugin>
        </plugins>
    </build>

</project>

创建项目工程目录结构:

第3步:配置文件application.properties中引入mybatis的配置信息,准备对应的实体类

  • application.properties (直接把之前项目中的复制过来)

#数据库连接
spring.datasource.driver-class-name=com.mysql.cj.jdbc.Driver
spring.datasource.url=jdbc:mysql://localhost:3306/tlias
spring.datasource.username=root
spring.datasource.password=1234

#开启mybatis的日志输出
mybatis.configuration.log-impl=org.apache.ibatis.logging.stdout.StdOutImpl

#开启数据库表字段 到 实体类属性的驼峰映射
mybatis.configuration.map-underscore-to-camel-case=true
  • 实体类
/*部门类*/
@Data
@NoArgsConstructor
@AllArgsConstructor
public class Dept {
    private Integer id;
    private String name;
    private LocalDateTime createTime;
    private LocalDateTime updateTime;
}
/*员工类*/
@Data
@NoArgsConstructor
@AllArgsConstructor
public class Emp {
    private Integer id;
    private String username;
    private String password;
    private String name;
    private Short gender;
    private String image;
    private Short job;
    private LocalDate entrydate;
    private Integer deptId;
    private LocalDateTime createTime;
    private LocalDateTime updateTime;
}

第4步:准备对应的Mapper、Service(接口、实现类)、Controller基础结构

数据访问层:

  • DeptMapper

package com.itheima.mapper;
import org.apache.ibatis.annotations.Mapper;

@Mapper
public interface DeptMapper {
}
  • EmpMapper
package com.itheima.mapper;
import org.apache.ibatis.annotations.Mapper;

@Mapper
public interface EmpMapper {
}

业务层:

  • DeptService

package com.itheima.service;

//部门业务规则
public interface DeptService {
}
  • DeptServiceImpl
package com.itheima.service.impl;
import lombok.extern.slf4j.Slf4j;
import org.springframework.stereotype.Service;

//部门业务实现类
@Slf4j
@Service
public class DeptServiceImpl implements DeptService {
}
  • EmpService
package com.itheima.service;

//员工业务规则
public interface EmpService {
}
  • EmpServiceImpl
package com.itheima.service.impl;
import com.itheima.service.EmpService;
import lombok.extern.slf4j.Slf4j;
import org.springframework.stereotype.Service;

//员工业务实现类
@Slf4j
@Service
public class EmpServiceImpl implements EmpService {

}

控制层:

  • DeptController

package com.itheima.controller;
import org.springframework.web.bind.annotation.RestController;

//部门管理控制器
@RestController
public class DeptController {
}
  • EmpController
package com.itheima.controller;
import org.springframework.web.bind.annotation.RestController;

//员工管理控制器
@RestController
public class EmpController {
}

项目工程结构:

开发规范

了解完需求也完成了环境搭建了,我们下面开始学习开发的一些规范。

开发规范我们主要从以下几方面介绍:

1、开发规范-REST

我们的案例是基于当前最为主流的前后端分离模式进行开发。

在前后端分离的开发模式中,前后端开发人员都需要根据提前定义好的接口文档,来进行前后端功能的开发。

后端开发人员:必须严格遵守提供的接口文档进行后端功能开发(保障开发的功能可以和前端对接)

而在前后端进行交互的时候,我们需要基于当前主流的REST风格的API接口进行交互。

什么是REST风格呢?

  • REST(Representational State Transfer),表述性状态转换,它是一种软件架构风格。

传统URL风格如下:

http://localhost:8080/user/getById?id=1     GET:查询id为1的用户
http://localhost:8080/user/saveUser         POST:新增用户
http://localhost:8080/user/updateUser       POST:修改用户
http://localhost:8080/user/deleteUser?id=1  GET:删除id为1的用户

我们看到,原始的传统URL呢,定义比较复杂,而且将资源的访问行为对外暴露出来了。

基于REST风格URL如下:

http://localhost:8080/users/1  GET:查询id为1的用户
http://localhost:8080/users    POST:新增用户
http://localhost:8080/users    PUT:修改用户
http://localhost:8080/users/1  DELETE:删除id为1的用户

其中总结起来,就一句话:通过URL定位要操作的资源,通过HTTP动词(请求方式)来描述具体的操作。

在REST风格的URL中,通过四种请求方式,来操作数据的增删改查。

  • GET : 查询

  • POST :新增

  • PUT :修改

  • DELETE :删除

我们看到如果是基于REST风格,定义URL,URL将会更加简洁、更加规范、更加优雅。

注意事项:

  • REST是风格,是约定方式,约定不是规定,可以打破

  • 描述模块的功能通常使用复数,也就是加s的格式来描述,表示此类资源,而非单个资源。如:users、emps、books…

开发规范-统一响应结果

前后端工程在进行交互时,使用统一响应结果 Result。

package com.itheima.pojo;

import lombok.AllArgsConstructor;
import lombok.Data;
import lombok.NoArgsConstructor;

@Data
@NoArgsConstructor
@AllArgsConstructor
public class Result {
    private Integer code;//响应码,1 代表成功; 0 代表失败
    private String msg;  //响应信息 描述字符串
    private Object data; //返回的数据

    //增删改 成功响应
    public static Result success(){
        return new Result(1,"success",null);
    }
    //查询 成功响应
    public static Result success(Object data){
        return new Result(1,"success",data);
    }
    //失败响应
    public static Result error(String msg){
        return new Result(0,msg,null);
    }
}

开发流程

我们在进行功能开发时,都是根据如下流程进行:

 

  1. 查看页面原型明确需求

    • 根据页面原型和需求,进行表结构设计、编写接口文档(已提供)

  2. 阅读接口文档

  3. 思路分析

  4. 功能接口开发

    • 就是开发后台的业务功能,一个业务功能,我们称为一个接口

  5. 功能接口测试

    • 功能开发完毕后,先通过Postman进行功能接口测试,测试通过后,再和前端进行联调测试

  6. 前后端联调测试

    • 和前端开发人员开发好的前端工程一起测试

 

02. 案例-部门管理-查询

原型和需求

查询的部门的信息:部门ID、部门名称、修改时间

通过页面原型以及需求描述,我们可以看到,部门查询,是不需要考虑分页操作的。

部门列表查询

基本信息

请求路径:/depts

请求方式:GET

接口描述:该接口用于部门列表数据查询
  • 请求参数

  • 响应数据

    参数格式:application/json

    参数说明

参数名类型是否必须备注
code number 必须 响应码,1 代表成功,0 代表失败
msg string 非必须 提示信息
data object[ ] 非必须 返回的数据
|- id number 非必须 id
|- name string 非必须 部门名称
|- createTime string 非必须 创建时间
|- updateTime string 非必须 修改时间

 

响应数据样例:

{
  "code": 1,
  "msg": "success",
  "data": [
    {
      "id": 1,
      "name": "学工部",
      "createTime": "2022-09-01T23:06:29",
      "updateTime": "2022-09-01T23:06:29"
    },
    {
      "id": 2,
      "name": "教研部",
      "createTime": "2022-09-01T23:06:29",
      "updateTime": "2022-09-01T23:06:29"
    }
  ]
}

思路分析

功能开发

通过查看接口文档:部门列表查询

请求路径:/depts

请求方式:GET

请求参数:无

响应数据:json格式

DeptController

@Slf4j
@RestController
public class DeptController {
    @Autowired
    private DeptService deptService;

    //@RequestMapping(value = "/depts" , method = RequestMethod.GET)
    @GetMapping("/depts")
    public Result list(){
        log.info("查询所有部门数据");
        List<Dept> deptList = deptService.list();
        return Result.success(deptList);
    }
}

@Slf4j注解源码:

DeptService(业务接口)

public interface DeptService {
    /**
     * 查询所有的部门数据
     * @return   存储Dept对象的集合
     */
    List<Dept> list();
}

DeptServiceImpl(业务实现类)

@Slf4j
@Service
public class DeptServiceImpl implements DeptService {
    @Autowired
    private DeptMapper deptMapper;
    
    @Override
    public List<Dept> list() {
        List<Dept> deptList = deptMapper.list();
        return deptList;
    }
}    

DeptMapper

@Mapper
public interface DeptMapper {
    //查询所有部门数据
    @Select("select id, name, create_time, update_time from dept")
    List<Dept> list();
}

功能测试

功能开发完成后,我们就可以启动项目,然后打开postman,发起GET请求,访问 :http://localhost:8080/depts

 

03. 案例-部门管理-前后端联调

完成了查询部门的功能,我们也通过postman工具测试通过了,下面我们再基于前后端分离的方式进行接口联调。具体操作如下:

1、将资料中提供的"前端环境"文件夹中的压缩包,拷贝到一个没有中文不带空格的目录下

 2、拷贝到一个没有中文不带空格的目录后,进行解压(解压到当前目录)

 3、启动nginx

4、打开浏览器,访问:http://localhost:90

5、测试:部门管理 - 查询部门列表

说明:只要按照接口文档开发功能接口,就能保证前后端程序交互

  • 后端:严格遵守接口文档进行功能接口开发

  • 前端:严格遵守接口文档访问功能接口

小结

 

04. 案例-部门管理-删除

需求

点击部门列表后面操作栏的 "删除" 按钮,就可以删除该部门信息。 此时,前端只需要给服务端传递一个ID参数就可以了。 我们从接口文档中也可以看得出来。

接口文档

删除部门

基本信息

请求路径:/depts/{id}

请求方式:DELETE

接口描述:该接口用于根据ID删除部门数据

请求参数 参数格式:路径参数

参数说明:

参数名类型是否必须备注
id number 必须 部门ID

请求参数样例:

/depts/1

响应数据 参数格式:application/json

参数说明:

参数名类型是否必须备注
code number 必须 响应码,1 代表成功,0 代表失败
msg string 非必须 提示信息
data object 非必须 返回的数据

响应数据样例:

{
    "code":1,
    "msg":"success",
    "data":null
}

思路分析

接口文档规定:
  • 前端请求路径:/depts/{id}
  • 前端请求方式:DELETE
问题1:怎么在controller中接收请求路径中的路径参数?
@PathVariable

问题2:如何限定请求方式是delete?

@DeleteMapping

功能开发

通过查看接口文档:删除部门

请求路径:/depts/{id}

请求方式:DELETE

请求参数:路径参数 {id}

响应数据:json格式

DeptController

@Slf4j
@RestController
public class DeptController {
    @Autowired
    private DeptService deptService;

    @DeleteMapping("/depts/{id}")
    public Result delete(@PathVariable Integer id) {
        //日志记录
        log.info("根据id删除部门");
        //调用service层功能
        deptService.delete(id);
        //响应
        return Result.success();
    }
    
    //省略...
}

DeptService

public interface DeptService {

    /**
     * 根据id删除部门
     * @param id    部门id
     */
    void delete(Integer id);

    //省略...
}

DeptServiceImpl

@Slf4j
@Service
public class DeptServiceImpl implements DeptService {
    @Autowired
    private DeptMapper deptMapper;

    @Override
    public void delete(Integer id) {
        //调用持久层删除功能
        deptMapper.deleteById(id);
    }
    
    //省略...
}

DeptMapper

@Mapper
public interface DeptMapper {
    /**
     * 根据id删除部门信息
     * @param id   部门id
     */
    @Delete("delete from dept where id = #{id}")
    void deleteById(Integer id);
   
    //省略...
}

功能测试

删除功能开发完成后,重新启动项目,使用postman,发起DELETE请求:

 

前后端联调

打开浏览器,测试后端功能接口:

 

05. 案例-部门管理-新增

需求

接口文档

添加部门

基本信息

请求路径:/depts

请求方式:POST

接口描述:该接口用于添加部门数据

请求参数

格式:application/json

参数说明:

 

参数名类型是否必须备注
name string 必须 部门名称

请求参数样例:

{
    "name": "教研部"
}

响应数据

参数格式:application/json

参数说明:

参数名类型是否必须备注
code number 必须 响应码,1 代表成功,0 代表失败
msg string 非必须 提示信息
data object 非必须 返回的数据

响应数据样例:

{
    "code":1,
    "msg":"success",
    "data":null
}

思路分析

接口文档规定:

  • 前端请求路径:/depts

  • 前端请求方式:POST

  • 前端请求参数 (Json格式):{ "name": "教研部" }

问题1:如何限定请求方式是POST?

@PostMapping

问题2:怎么在controller中接收json格式的请求参数?

@RequestBody  //把前端传递的json数据填充到实体类中

功能开发

通过查看接口文档:新增部门

请求路径:/depts

请求方式:POST

请求参数:json格式

响应数据:json格式

DeptController

@Slf4j
@RestController
public class DeptController {
    @Autowired
    private DeptService deptService;

    @PostMapping("/depts")
    public Result add(@RequestBody Dept dept){
        //记录日志
        log.info("新增部门:{}",dept);
        //调用service层添加功能
        deptService.add(dept);
        //响应
        return Result.success();
    }

    //省略...
}

DeptService

public interface DeptService {

    /**
     * 新增部门
     * @param dept  部门对象
     */
    void add(Dept dept);

    //省略...
}

DeptServiceImpl

@Slf4j
@Service
public class DeptServiceImpl implements DeptService {
    @Autowired
    private DeptMapper deptMapper;

    @Override
    public void add(Dept dept) {
        //补全部门数据
        dept.setCreateTime(LocalDateTime.now());
        dept.setUpdateTime(LocalDateTime.now());
        //调用持久层增加功能
        deptMapper.inser(dept);
    }

    //省略...
}

DeptMapper

@Mapper
public interface DeptMapper {

    @Insert("insert into dept (name, create_time, update_time) values (#{name},#{createTime},#{updateTime})")
    void inser(Dept dept);

    //省略...
}

功能测试

新增功能开发完成后,重新启动项目,使用postman,发起POST请求:

前后端联调

打开浏览器,测试后端功能接口:

请求路径

我们部门管理的查询删除新增功能全部完成了,接下来我们要对controller层的代码进行优化。

首先我们先来看下目前controller层代码:

以上三个方法上的请求路径,存在一个共同点:都是以/depts作为开头。(重复了)

在Spring当中为了简化请求路径的定义,可以把公共的请求路径,直接抽取到类上,在类上加一个注解@RequestMapping,并指定请求路径"/depts"。代码参照如下:

优化前后的对比:

注意事项:一个完整的请求路径,应该是类上@RequestMapping的value属性 + 方法上的 @RequestMapping的value属性

 

作业:修改部门----根据ID查询、修改部门

1、根据ID查询

EmpController:

    /*
     * 根据ID查询
     * */
    @GetMapping("/depts/{id}")
    public Result selectById(@PathVariable Integer id){
        log.info("获取id为"+id+"的数据");
        Dept dept = deptService.selectById(id);
        return Result.success(dept);
    }

EmpService:

    /*
     * 根据ID查询数据
     * */
    Dept selectById(Integer id);

EmpServiceImpl:

    @Override
    public Dept selectById(Integer id){
        Dept dept = deptMapper.selectById(id);
        return dept;
    }

EmpMapper :

    @Select("select * from dept where id = #{id}")
    Dept selectById(Integer id);

2、修改部门

EmpController:

    /*
    * 修改部门
    * */
    @PutMapping("/depts")
    public Result update(@RequestBody Dept dept){
        log.info("修改部门"+dept);
        deptService.update(dept);
        return Result.success();
    }

EmpService:

    /*
    * 修改部门
    * */
    void update(Dept dept);

EmpServiceImpl:

    @Override
    public void update(Dept dept){
        dept.setUpdateTime(LocalDateTime.now());
        deptMapper.update(dept);
    }

EmpMapper:

    @Update("update dept set name = #{name}, update_time = #{updateTime} where id = #{id}")
    void update(Dept dept);

 

06. 案例-员工管理-分页查询-分析

基础分页

需求分析

我们之前做的查询功能,是将数据库中所有的数据查询出来并展示到页面上,试想如果数据库中的数据有很多(假设有十几万条)的时候,将数据全部展示出来肯定不现实,那如何解决这个问题呢?

使用分页解决这个问题。每次只展示一页的数据,比如:一页展示10条数据,如果还想看其他的数据,可以通过点击页码进行查询。

要想从数据库中进行分页查询,我们要使用LIMIT关键字,格式为:limit 开始索引 每页显示的条数

查询第1页数据的SQL语句是:

select * from emp  limit 0,10;

查询第2页数据的SQL语句是:

select * from emp  limit 10,10;

查询第3页的数据的SQL语句是:

select * from emp  limit 20,10;

观察以上SQL语句,发现: 开始索引一直在改变 , 每页显示条数是固定的

开始索引的计算公式: 开始索引 = (当前页码 - 1) * 每页显示条数

我们继续基于页面原型,继续分析,得出以下结论:

  1. 前端在请求服务端时,传递的参数

    • 当前页码 page

    • 每页显示条数 pageSize

  2. 后端需要响应什么数据给前端

    • 所查询到的数据列表(存储到List 集合中)

    • 总记录数

后台给前端返回的数据包含:List集合(数据列表)、total(总记录数)

而这两部分我们通常封装到PageBean对象中,并将该对象转换为json格式的数据响应回给浏览器。

@Data
@NoArgsConstructor
@AllArgsConstructor
public class PageBean {
private Long total; //总记录数
private List rows; //当前页数据列表
}

接口文档

员工列表查询

基本信息

请求路径:/emps

请求方式:GET

接口描述:该接口用于员工列表数据的条件分页查询

请求参数

参数格式:queryString

参数说明:

参数名称是否必须示例备注
name 姓名
gender 1 性别 , 1 男 , 2 女
begin 2010-01-01 范围匹配的开始时间(入职日期)
end 2020-01-01 范围匹配的结束时间(入职日期)
page 1 分页查询的页码,如果未指定,默认为1
pageSize 10 分页查询的每页记录数,如果未指定,默认为10

请求数据样例:

/emps?name=张&gender=1&begin=2007-09-01&end=2022-09-01&page=1&pageSize=10

响应数据

参数格式:application/json

参数说明:

名称类型是否必须默认值备注其他信息
code number 必须   响应码, 1 成功 , 0 失败  
msg string 非必须   提示信息  
data object 必须   返回的数据  
|- total number 必须   总记录数  
|- rows object [] 必须   数据列表 item 类型: object
|- id number 非必须   id  
|- username string 非必须   用户名  
|- name string 非必须   姓名  
|- password string 非必须   密码  
|- entrydate string 非必须   入职日期  
|- gender number 非必须   性别 , 1 男 ; 2 女  
|- image string 非必须   图像  
|- job number 非必须   职位, 说明: 1 班主任,2 讲师, 3 学工主管, 4 教研主管, 5 咨询师  
|- deptId number 非必须   部门id  
|- createTime string 非必须   创建时间  
|- updateTime string 非必须   更新时间

响应数据样例:

{
  "code": 1,
  "msg": "success",
  "data": {
    "total": 2,
    "rows": [
       {
        "id": 1,
        "username": "jinyong",
        "password": "123456",
        "name": "金庸",
        "gender": 1,
        "image": "https://web-framework.oss-cn-hangzhou.aliyuncs.com/2022-09-02-00-27-53B.jpg",
        "job": 2,
        "entrydate": "2015-01-01",
        "deptId": 2,
        "createTime": "2022-09-01T23:06:30",
        "updateTime": "2022-09-02T00:29:04"
      },
      {
        "id": 2,
        "username": "zhangwuji",
        "password": "123456",
        "name": "张无忌",
        "gender": 1,
        "image": "https://web-framework.oss-cn-hangzhou.aliyuncs.com/2022-09-02-00-27-53B.jpg",
        "job": 2,
        "entrydate": "2015-01-01",
        "deptId": 2,
        "createTime": "2022-09-01T23:06:30",
        "updateTime": "2022-09-02T00:29:04"
      }
    ]
  }
}

思路分析

分页查询需要的数据,封装在PageBean对象中:

 

07. 案例-员工管理-分页查询-实现

功能开发

通过查看接口文档:员工列表查询

请求路径:/emps

请求方式:GET

请求参数:跟随在请求路径后的参数字符串。 例:/emps?page=1&pageSize=10

响应数据:json格式

EmpController

import com.itheima.pojo.PageBean;
import com.itheima.pojo.Result;
import com.itheima.service.EmpService;
import lombok.extern.slf4j.Slf4j;
import org.springframework.beans.factory.annotation.Autowired;
import org.springframework.web.bind.annotation.GetMapping;
import org.springframework.web.bind.annotation.RequestMapping;
import org.springframework.web.bind.annotation.RequestParam;
import org.springframework.web.bind.annotation.RestController;

@Slf4j
@RestController
@RequestMapping("/emps")
public class EmpController {

    @Autowired
    private EmpService empService;

    //条件分页查询
    @GetMapping
    public Result page(@RequestParam(defaultValue = "1") Integer page,
                       @RequestParam(defaultValue = "10") Integer pageSize) {
        //记录日志
        log.info("分页查询,参数:{},{}", page, pageSize);
        //调用业务层分页查询功能
        PageBean pageBean = empService.page(page, pageSize);
        //响应
        return Result.success(pageBean);
    }
}

@RequestParam(defaultValue="默认值") //设置请求参数默认值

EmpService

public interface EmpService {
    /**
     * 条件分页查询
     * @param page 页码
     * @param pageSize 每页展示记录数
     * @return
     */
    PageBean page(Integer page, Integer pageSize);
}

EmpServiceImpl

import com.itheima.mapper.EmpMapper;
import com.itheima.pojo.Emp;
import com.itheima.pojo.PageBean;
import com.itheima.service.EmpService;
import lombok.extern.slf4j.Slf4j;
import org.springframework.beans.factory.annotation.Autowired;
import org.springframework.stereotype.Service;
import java.time.LocalDate;
import java.util.List;

@Slf4j
@Service
public class EmpServiceImpl implements EmpService {
    @Autowired
    private EmpMapper empMapper;

    @Override
    public PageBean page(Integer page, Integer pageSize) {
        //1、获取总记录数
        Long count = empMapper.count();

        //2、获取分页查询结果列表
        Integer start = (page - 1) * pageSize; //计算起始索引 , 公式: (页码-1)*页大小
        List<Emp> empList = empMapper.list(start, pageSize);

        //3、封装PageBean对象
        PageBean pageBean = new PageBean(count , empList);
        return pageBean;
    }
}

Empmapper

@Mapper
public interface EmpMapper {
    //获取总记录数
    @Select("select count(*) from emp")
    public Long count();

    //获取当前页的结果列表
    @Select("select * from emp limit #{start}, #{pageSize}")
    public List<Emp> list(Integer start, Integer pageSize);
}

功能测试

功能开发完成后,重新启动项目,使用postman,发起POST请求:

前后端联调

打开浏览器,测试后端功能接口:

小结

 

08. 案例-员工管理-分页查询-PageHelper插件

介绍

前面我们已经完了基础的分页查询,大家会发现:分页查询功能编写起来比较繁琐。

在Mapper接口中定义两个方法执行两条不同的SQL语句:

  1. 查询总记录数

  2. 指定页码的数据列表

在Service当中,调用Mapper接口的两个方法,分别获取:总记录数、查询结果列表,然后在将获取的数据结果封装到PageBean对象中。

大家思考下:在未来开发其他项目,只要涉及到分页查询功能(例:订单、用户、支付、商品),都必须按照以上操作完成功能开发

结论:原始方式的分页查询,存在着"步骤固定"、"代码频繁"的问题

解决方案:可以使用一些现成的分页插件完成。对于Mybatis来讲现在最主流的就是PageHelper。

PageHelper是Mybatis的一款功能强大、方便易用的分页插件,支持任何形式的单标、多表的分页查询。

官网:https://pagehelper.github.io/

在执行empMapper.list()方法时,就是执行:select * from emp 语句,怎么能够实现分页操作呢?

分页插件帮我们完成了以下操作:

  1. 先获取到要执行的SQL语句:select * from emp

  2. 把SQL语句中的字段列表,变为:count(*)

  3. 执行SQL语句:select count(*) from emp //获取到总记录数

  4. 再对要执行的SQL语句:select * from emp 进行改造,在末尾添加 limit ? , ?

  5. 执行改造后的SQL语句:select * from emp limit ? , ?

代码实现

当使用了PageHelper分页插件进行分页,就无需再Mapper中进行手动分页了。 在Mapper中我们只需要进行正常的列表查询即可。在Service层中,调用Mapper的方法之前设置分页参数,在调用Mapper方法执行查询之后,解析分页结果,并将结果封装到PageBean对象中返回。

1、在pom.xml引入依赖

<dependency>
    <groupId>com.github.pagehelper</groupId>
    <artifactId>pagehelper-spring-boot-starter</artifactId>
    <version>1.4.2</version>
</dependency>

2、EmpMapper

@Mapper
public interface EmpMapper {
    //获取当前页的结果列表
    @Select("select * from emp")
    public List<Emp> page(Integer start, Integer pageSize);
}

3、EmpServiceImpl

@Override
public PageBean page(Integer page, Integer pageSize) {
    // 设置分页参数
    PageHelper.startPage(page, pageSize); 
    // 执行分页查询
    List<Emp> empList = empMapper.list(); 
    // 获取分页结果
    Page<Emp> p = (Page<Emp>) empList;   
    //封装PageBean
    PageBean pageBean = new PageBean(p.getTotal(), p.getResult()); 
    return pageBean;
}

测试

功能开发完成后,我们重启项目工程,打开postman,发起GET请求,访问 :http://localhost:8080/emps?page=1&pageSize=5

后端程序SQL输出:

 

09. 案例-员工管理-分页条件查询 

分页查询(带条件)

需求

通过员工管理的页面原型我们可以看到,员工列表页面的查询,不仅仅需要考虑分页,还需要考虑查询条件。 分页查询我们已经实现了,接下来,我们需要考虑在分页查询的基础上,再加上查询条件。

我们看到页面原型及需求中描述,搜索栏的搜索条件有三个,分别是:

  • 姓名:模糊匹配

  • 性别:精确匹配

  • 入职日期:范围匹配

select * 
from emp
where 
  name like concat('%','','%')   -- 条件1:根据姓名模糊匹配
  and gender = 1                   -- 条件2:根据性别精确匹配
  and entrydate = between '2000-01-01' and '2010-01-01'  -- 条件3:根据入职日期范围匹配
order by update_time desc;

而且上述的三个条件,都是可以传递,也可以不传递的,也就是动态的。 我们需要使用前面学习的Mybatis中的动态SQL 。

思路分析

功能开发

通过查看接口文档:员工列表查询

请求路径:/emps

请求方式:GET

请求参数:

参数名称是否必须示例备注
name 姓名
gender 1 性别 , 1 男 , 2 女
begin 2010-01-01 范围匹配的开始时间(入职日期)
end 2020-01-01 范围匹配的结束时间(入职日期)
page 1 分页查询的页码,如果未指定,默认为1
pageSize 10 分页查询的每页记录数,如果未指定,默认为10

 

在原有分页查询的代码基础上进行改造:

EmpController

@Slf4j
@RestController
@RequestMapping("/emps")
public class EmpController {

    @Autowired
    private EmpService empService;

    //条件分页查询
    @GetMapping
    public Result page(@RequestParam(defaultValue = "1") Integer page,
                       @RequestParam(defaultValue = "10") Integer pageSize,
                       String name, Short gender,
                       @DateTimeFormat(pattern = "yyyy-MM-dd") LocalDate begin,
                       @DateTimeFormat(pattern = "yyyy-MM-dd") LocalDate end) {
        //记录日志
        log.info("分页查询,参数:{},{},{},{},{},{}", page, pageSize,name, gender, begin, end);
        //调用业务层分页查询功能
        PageBean pageBean = empService.page(page, pageSize, name, gender, begin, end);
        //响应
        return Result.success(pageBean);
    }
}

EmpService

public interface EmpService {
    /**
     * 条件分页查询
     * @param page     页码
     * @param pageSize 每页展示记录数
     * @param name     姓名
     * @param gender   性别
     * @param begin   开始时间
     * @param end     结束时间
     * @return
     */
    PageBean page(Integer page, Integer pageSize, String name, Short gender, LocalDate begin, LocalDate end);
}

EmpServiceImpl

@Slf4j
@Service
public class EmpServiceImpl implements EmpService {
    @Autowired
    private EmpMapper empMapper;

    @Override
    public PageBean page(Integer page, Integer pageSize, String name, Short gender, LocalDate begin, LocalDate end) {
        //设置分页参数
        PageHelper.startPage(page, pageSize);
        //执行条件分页查询
        List<Emp> empList = empMapper.list(name, gender, begin, end);
        //获取查询结果
        Page<Emp> p = (Page<Emp>) empList;
        //封装PageBean
        PageBean pageBean = new PageBean(p.getTotal(), p.getResult());
        return pageBean;
    }
}

EmpMapper

@Mapper
public interface EmpMapper {
    //获取当前页的结果列表
    public List<Emp> list(String name, Short gender, LocalDate begin, LocalDate end);
}

EmpMapper.xml

<?xml version="1.0" encoding="UTF-8" ?>
<!DOCTYPE mapper
        PUBLIC "-//mybatis.org//DTD Mapper 3.0//EN"
        "http://mybatis.org/dtd/mybatis-3-mapper.dtd">
<mapper namespace="com.itheima.mapper.EmpMapper">

    <!-- 条件分页查询 -->
    <select id="list" resultType="com.itheima.pojo.Emp">
        select * from emp
        <where>
            <if test="name != null and name != ''">
                name like concat('%',#{name},'%')
            </if>
            <if test="gender != null">
                and gender = #{gender}
            </if>
            <if test="begin != null and end != null">
                and entrydate between #{begin} and #{end}
            </if>
        </where>
        order by update_time desc
    </select>
</mapper>

功能测试

功能开发完成后,重启项目工程,打开postman,发起GET请求:

 控制台SQL语句:

前后端联调

打开浏览器,测试后端功能接口:

 

10. 案例-员工管理-删除员工

查询员完成之后,我们继续开发新的功能:删除员工。

需求

当我们勾选列表前面的复选框,然后点击 "批量删除" 按钮,就可以将这一批次的员工信息删除掉了。也可以只勾选一个复选框,仅删除一个员工信息。

问题:我们需要开发两个功能接口吗?一个删除单个员工,一个删除多个员工

答案:不需要。 只需要开发一个功能接口即可(删除多个员工包含只删除一个员工)

接口文档

删除员工

基本信息

请求路径:/emps/{ids}

请求方式:DELETE

接口描述:该接口用于批量删除员工的数据信息

请求参数

参数格式:路径参数

参数说明:

参数名类型示例是否必须备注
ids 数组 array 1,2,3 必须 员工的id数组

请求参数样例:

/emps/1,2,3

响应数据

参数格式:application/json

参数说明:

参数名类型是否必须备注
code number 必须 响应码,1 代表成功,0 代表失败
msg string 非必须 提示信息
data object 非必须 返回的数据

响应数据样例:

{
    "code":1,
    "msg":"success",
    "data":null
}

思路分

接口文档规定:

  • 前端请求路径:/emps/{ids}

  • 前端请求方式:DELETE

问题1:怎么在controller中接收请求路径中的路径参数?

@PathVariable

问题2:如何限定请求方式是delete?

@DeleteMapping

问题3:在Mapper接口中,执行delete操作的SQL语句时,条件中的id值是不确定的是动态的,怎么实现呢?

Mybatis中的动态SQL:foreach

功能开发

通过查看接口文档:删除员工

请求路径:/emps/{ids}

请求方式:DELETE

请求参数:路径参数 {ids}

响应数据:json格式

EmpController

@Slf4j
@RestController
@RequestMapping("/emps")
public class EmpController {

    @Autowired
    private EmpService empService;

    //批量删除
    @DeleteMapping("/{ids}")
    public Result delete(@PathVariable List<Integer> ids){
        empService.delete(ids);
        return Result.success();
    }

    //条件分页查询
    @GetMapping
    public Result page(@RequestParam(defaultValue = "1") Integer page,
                       @RequestParam(defaultValue = "10") Integer pageSize,
                       String name, Short gender,
                       @DateTimeFormat(pattern = "yyyy-MM-dd") LocalDate begin,
                       @DateTimeFormat(pattern = "yyyy-MM-dd") LocalDate end) {
        //记录日志
        log.info("分页查询,参数:{},{},{},{},{},{}", page, pageSize,name, gender, begin, end);
        //调用业务层分页查询功能
        PageBean pageBean = empService.page(page, pageSize, name, gender, begin, end);
        //响应
        return Result.success(pageBean);
    }
}

EmpService

public interface EmpService {

    /**
     * 批量删除操作
     * @param ids id集合
     */
    void delete(List<Integer> ids);

    //省略...
}

EmpServiceImpl

@Slf4j
@Service
public class EmpServiceImpl implements EmpService {
    @Autowired
    private EmpMapper empMapper;

    @Override
    public void delete(List<Integer> ids) {
        empMapper.delete(ids);
    }

    //省略...
}

EmpMapper

@Mapper
public interface EmpMapper {
    //批量删除
    void delete(List<Integer> ids);

    //省略...
}

EmpMapper.xml

<?xml version="1.0" encoding="UTF-8" ?>
<!DOCTYPE mapper
        PUBLIC "-//mybatis.org//DTD Mapper 3.0//EN"
        "http://mybatis.org/dtd/mybatis-3-mapper.dtd">
<mapper namespace="com.itheima.mapper.EmpMapper">

    <!--批量删除员工-->
    <select id="delete">
        delete from emp where id in
        <foreach collection="ids" item="id" open="(" close=")" separator=",">
            #{id}
        </foreach>
    </select>

    <!-- 省略... -->

</mapper>

功能测试

功能开发完成后,重启项目工程,打开postman,发起DELETE请求:


控制台SQL语句:

前后端联调

打开浏览器,测试后端功能接口:

小结