U-Boot 2020.01 (Dec 13 2022 - 03:00:01 +0000)
Board: Xilinx ZynqMP
DRAM: 4 GiB
PMUFW: v1.1
EL Level: EL2
Chip ID: zu3eg
NAND: 0 MiB
MMC: mmc@ff160000: 0, mmc@ff170000: 1
In: serial@ff000000
Out: serial@ff000000
Err: serial@ff000000
Bootmode: EMMC_MODE
Reset reason: SOFT
Net: MDIO bus not found ethernet@ff0d0000
No ethernet found.
Hit any key to stop autoboot: 0
switch to partitions #0, OK
mmc0(part 0) is current device
Scanning mmc 0:1...
Found U-Boot script /boot.scr
2007 bytes read in 19 ms (102.5 KiB/s)
## Executing script at 20000000
8165268 bytes read in 613 ms (12.7 MiB/s)
## Loading kernel from FIT Image at 10000000 ...
Using 'conf@system-top.dtb' configuration
Trying 'kernel@1' kernel subimage
Description: Linux kernel
Type: Kernel Image
Compression: gzip compressed
Data Start: 0x100000e8
Data Size: 8124278 Bytes = 7.7 MiB
Architecture: AArch64
OS: Linux
Load Address: 0x00080000
Entry Point: 0x00080000
Hash algo: sha256
Hash value: 6f1c7977ea994814de7a5b4c135472baa2adfcbc929c2b8c1d87c97049564f3a
Verifying Hash Integrity ... sha256+ OK
## Loading fdt from FIT Image at 10000000 ...
Using 'conf@system-top.dtb' configuration
Trying 'fdt@system-top.dtb' fdt subimage
Description: Flattened Device Tree blob
Type: Flat Device Tree
Compression: uncompressed
Data Start: 0x107bf970
Data Size: 39100 Bytes = 38.2 KiB
Architecture: AArch64
Hash algo: sha256
Hash value: 1e68918a0d89f74ead3fb7329ab8dccdd3963c01d0fac62bc980d5234ec6592a
Verifying Hash Integrity ... sha256+ OK
Booting using the fdt blob at 0x107bf970
Uncompressing Kernel Image
Loading Device Tree to 000000000fff3000, end 000000000ffff8bb ... OK
Starting kernel ...
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[ 0.000000] Linux version 5.4.0-xilinx-v2020.1 (oe-user@oe-host) (gcc version 9.2.0 (GCC)) #1 SMP Sun Oct 16 07:14:01 UTC 2022
[ 0.000000] Machine model: xlnx,zynqmp
[ 0.000000] earlycon: cdns0 at MMIO 0x00000000ff000000 (options '115200n8')
[ 0.000000] printk: bootconsole [cdns0] enabled
[ 0.000000] efi: Getting EFI parameters from FDT:
[ 0.000000] efi: UEFI not found.
[ 0.000000] cma: Reserved 256 MiB at 0x0000000060000000
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.1 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
[ 0.000000] psci: SMC Calling Convention v1.1
[ 0.000000] percpu: Embedded 22 pages/cpu s49944 r8192 d31976 u90112
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] CPU features: detected: ARM erratum 845719
[ 0.000000] Speculative Store Bypass Disable mitigation not required
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1023876
[ 0.000000] Kernel command line: earlycon console=ttyPS0,115200 clk_ignore_unused root=/dev/mmcblk0p2 rw rootwait
[ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] software IO TLB: mapped [mem 0x7bf00000-0x7ff00000] (64MB)
[ 0.000000] Memory: 3735000K/4160512K available (11644K kernel code, 672K rwdata, 3624K rodata, 704K init, 323K bss, 163368K reserved, 262144K cma-reserved)
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] rcu: RCU event tracing is enabled.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] GIC: Adjusting CPU interface base to 0x00000000f902f000
[ 0.000000] GIC: Using split EOI/Deactivate mode
[ 0.000000] random: get_random_bytes called from start_kernel+0x2a8/0x42c with crng_init=0
[ 0.000000] arch_timer: cp15 timer(s) running at 33.33MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x7b0074340, max_idle_ns: 440795202884 ns
[ 0.000003] sched_clock: 56 bits at 33MHz, resolution 30ns, wraps every 2199023255543ns
[ 0.008289] Console: colour dummy device 80x25
[ 0.012392] Calibrating delay loop (skipped), value calculated using timer frequency.. 66.66 BogoMIPS (lpj=133332)
[ 0.022668] pid_max: default: 32768 minimum: 301
[ 0.027405] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.034616] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.043389] ASID allocator initialised with 32768 entries
[ 0.047816] rcu: Hierarchical SRCU implementation.
[ 0.052715] EFI services will not be available.
[ 0.057154] smp: Bringing up secondary CPUs ...
[ 0.061866] Detected VIPT I-cache on CPU1
[ 0.061898] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[ 0.062276] Detected VIPT I-cache on CPU2
[ 0.062297] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
[ 0.062651] Detected VIPT I-cache on CPU3
[ 0.062672] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
[ 0.062725] smp: Brought up 1 node, 4 CPUs
[ 0.096971] SMP: Total of 4 processors activated.
[ 0.101644] CPU features: detected: 32-bit EL0 Support
[ 0.106747] CPU features: detected: CRC32 instructions
[ 0.111882] CPU: All CPU(s) started at EL2
[ 0.115929] alternatives: patching kernel code
[ 0.121499] devtmpfs: initialized
[ 0.128037] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.133317] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.146860] xor: measuring software checksum speed
[ 0.184217] 8regs : 2111.000 MB/sec
[ 0.224248] 32regs : 2422.000 MB/sec
[ 0.264281] arm64_neon: 2103.000 MB/sec
[ 0.264318] xor: using function: 32regs (2422.000 MB/sec)
[ 0.268193] pinctrl core: initialized pinctrl subsystem
[ 0.274018] NET: Registered protocol family 16
[ 0.278845] DMA: preallocated 256 KiB pool for atomic allocations
[ 0.283874] audit: initializing netlink subsys (disabled)
[ 0.289331] audit: type=2000 audit(0.228:1): state=initialized audit_enabled=0 res=1
[ 0.296932] cpuidle: using governor menu
[ 0.300964] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.320225] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.321274] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[ 0.327944] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.334609] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[ 1.549053] DRBG: Continuing without Jitter RNG
[ 1.626377] raid6: neonx8 gen() 1372 MB/s
[ 1.694425] raid6: neonx8 xor() 1298 MB/s
[ 1.762503] raid6: neonx4 gen() 1315 MB/s
[ 1.830538] raid6: neonx4 xor() 1261 MB/s
[ 1.898596] raid6: neonx2 gen() 999 MB/s
[ 1.966639] raid6: neonx2 xor() 1042 MB/s
[ 2.034679] raid6: neonx1 gen() 647 MB/s
[ 2.102767] raid6: neonx1 xor() 783 MB/s
[ 2.170819] raid6: int64x8 gen() 1033 MB/s
[ 2.238864] raid6: int64x8 xor() 675 MB/s
[ 2.306950] raid6: int64x4 gen() 869 MB/s
[ 2.374953] raid6: int64x4 xor() 651 MB/s
[ 2.443026] raid6: int64x2 gen() 602 MB/s
[ 2.511065] raid6: int64x2 xor() 525 MB/s
[ 2.579219] raid6: int64x1 gen() 400 MB/s
[ 2.647170] raid6: int64x1 xor() 401 MB/s
[ 2.647208] raid6: using algorithm neonx8 gen() 1372 MB/s
[ 2.651160] raid6: .... xor() 1298 MB/s, rmw enabled
[ 2.656090] raid6: using neon recovery algorithm
[ 2.661000] iommu: Default domain type: Translated
[ 2.665738] SCSI subsystem initialized
[ 2.669379] usbcore: registered new interface driver usbfs
[ 2.674715] usbcore: registered new interface driver hub
[ 2.679990] usbcore: registered new device driver usb
[ 2.685029] mc: Linux media interface: v0.10
[ 2.689240] videodev: Linux video capture interface: v2.00
[ 2.694687] pps_core: LinuxPPS API ver. 1 registered
[ 2.699601] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 2.708695] PTP clock support registered
[ 2.712588] EDAC MC: Ver: 3.0.0
[ 2.716094] zynqmp-ipi-mbox mailbox@ff990400: Registered ZynqMP IPI mbox with TX/RX channels.
[ 2.724351] FPGA manager framework
[ 2.727665] Advanced Linux Sound Architecture Driver Initialized.
[ 2.733868] Bluetooth: Core ver 2.22
[ 2.737158] NET: Registered protocol family 31
[ 2.741555] Bluetooth: HCI device and connection manager initialized
[ 2.747871] Bluetooth: HCI socket layer initialized
[ 2.752714] Bluetooth: L2CAP socket layer initialized
[ 2.757735] Bluetooth: SCO socket layer initialized
[ 2.762907] clocksource: Switched to clocksource arch_sys_counter
[ 2.768732] VFS: Disk quotas dquot_6.6.0
[ 2.772569] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 2.783700] NET: Registered protocol family 2
[ 2.784090] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
[ 2.792217] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 2.800254] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear)
[ 2.807715] TCP: Hash tables configured (established 32768 bind 32768)
[ 2.813851] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
[ 2.820525] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
[ 2.827720] NET: Registered protocol family 1
[ 2.832134] RPC: Registered named UNIX socket transport module.
[ 2.837752] RPC: Registered udp transport module.
[ 2.842417] RPC: Registered tcp transport module.
[ 2.847087] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 2.853750] PCI: CLS 0 bytes, default 64
[ 2.857852] hw perfevents: no interrupt-affinity property for /pmu, guessing.
[ 2.864637] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
[ 2.872948] Initialise system trusted keyrings
[ 2.876671] workingset: timestamp_bits=46 max_order=20 bucket_order=0
[ 2.883801] NFS: Registering the id_resolver key type
[ 2.888016] Key type id_resolver registered
[ 2.892154] Key type id_legacy registered
[ 2.896138] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 2.902808] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[ 2.923342] NET: Registered protocol family 38
[ 2.923383] Key type asymmetric registered
[ 2.926211] Asymmetric key parser 'x509' registered
[ 2.931083] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 2.938415] io scheduler mq-deadline registered
[ 2.942912] io scheduler kyber registered
[ 2.975921] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 2.977861] uartlite 80000000.uartlite: No serial alias passed. Using the first free id
[ 2.984597] uartlite 80000000.uartlite: Checking id 0
[ 2.991456] cacheinfo: Unable to detect cache hierarchy for CPU 0
[ 3.000191] brd: module loaded
[ 3.004898] loop: module loaded
[ 3.005565] mtdoops: mtd device (mtddev=name/number) must be supplied
[ 3.009928] libphy: Fixed MDIO Bus: probed
[ 3.013896] tun: Universal TUN/TAP device driver, 1.6
[ 3.017973] CAN device driver interface
[ 3.022424] usbcore: registered new interface driver asix
[ 3.027103] usbcore: registered new interface driver ax88179_178a
[ 3.033139] usbcore: registered new interface driver cdc_ether
[ 3.038932] usbcore: registered new interface driver net1080
[ 3.044554] usbcore: registered new interface driver cdc_subset
[ 3.050435] usbcore: registered new interface driver zaurus
[ 3.055984] usbcore: registered new interface driver cdc_ncm
[ 3.062249] usbcore: registered new interface driver uas
[ 3.066882] usbcore: registered new interface driver usb-storage
[ 3.073381] rtc_zynqmp ffa60000.rtc: registered as rtc0
[ 3.078058] i2c /dev entries driver
[ 3.082934] usbcore: registered new interface driver uvcvideo
[ 3.087178] USB Video Class driver (1.1.1)
[ 3.091586] Bluetooth: HCI UART driver ver 2.3
[ 3.095663] Bluetooth: HCI UART protocol H4 registered
[ 3.100762] Bluetooth: HCI UART protocol BCSP registered
[ 3.106053] Bluetooth: HCI UART protocol LL registered
[ 3.111139] Bluetooth: HCI UART protocol ATH3K registered
[ 3.116516] Bluetooth: HCI UART protocol Three-wire (H5) registered
[ 3.122765] Bluetooth: HCI UART protocol Intel registered
[ 3.128106] Bluetooth: HCI UART protocol QCA registered
[ 3.133308] usbcore: registered new interface driver bcm203x
[ 3.138930] usbcore: registered new interface driver bpa10x
[ 3.144467] usbcore: registered new interface driver bfusb
[ 3.149916] usbcore: registered new interface driver btusb
[ 3.155378] usbcore: registered new interface driver ath3k
[ 3.160908] EDAC MC: ECC not enabled
[ 3.164481] EDAC DEVICE0: Giving out device to module zynqmp-ocm-edac controller zynqmp_ocm: DEV ff960000.memory-controller (INTERRUPT)
[ 3.176826] sdhci: Secure Digital Host Controller Interface driver
[ 3.182590] sdhci: Copyright(c) Pierre Ossman
[ 3.186913] sdhci-pltfm: SDHCI platform and OF driver helper
[ 3.192861] ledtrig-cpu: registered to indicate activity on CPUs
[ 3.198553] zynqmp_firmware_probe Platform Management API v1.1
[ 3.204305] zynqmp_firmware_probe Trustzone version v1.0
[ 3.235383] alg: No test for xilinx-zynqmp-aes (zynqmp-aes)
[ 3.235562] zynqmp_aes zynqmp_aes: AES Successfully Registered
[ 3.235562]
[ 3.242829] alg: No test for xilinx-keccak-384 (zynqmp-keccak-384)
[ 3.249045] alg: No test for xilinx-zynqmp-rsa (zynqmp-rsa)
[ 3.254592] usbcore: registered new interface driver usbhid
[ 3.259883] usbhid: USB HID core driver
[ 3.266118] fpga_manager fpga0: Xilinx ZynqMP FPGA Manager registered
[ 3.270387] usbcore: registered new interface driver snd-usb-audio
[ 3.277024] pktgen: Packet Generator for packet performance testing. Version: 2.75
[ 3.284345] Initializing XFRM netlink socket
[ 3.288077] NET: Registered protocol family 10
[ 3.292815] Segment Routing with IPv6
[ 3.296153] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[ 3.302265] NET: Registered protocol family 17
[ 3.306340] NET: Registered protocol family 15
[ 3.310757] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 3.323631] can: controller area network core (rev 20170425 abi 9)
[ 3.329798] NET: Registered protocol family 29
[ 3.334184] can: raw protocol (rev 20170425)
[ 3.338420] can: broadcast manager protocol (rev 20170425 t)
[ 3.344044] can: netlink gateway (rev 20190810) max_hops=1
[ 3.349576] Bluetooth: RFCOMM TTY layer initialized
[ 3.354345] Bluetooth: RFCOMM socket layer initialized
[ 3.359449] Bluetooth: RFCOMM ver 1.11
[ 3.363165] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 3.368434] Bluetooth: BNEP filters: protocol multicast
[ 3.373628] Bluetooth: BNEP socket layer initialized
[ 3.378555] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 3.384439] Bluetooth: HIDP socket layer initialized
[ 3.389483] 9pnet: Installing 9P2000 support
[ 3.393626] Key type dns_resolver registered
[ 3.398125] registered taskstats version 1
[ 3.401918] Loading compiled-in X.509 certificates
[ 3.407108] Btrfs loaded, crc32c=crc32c-generic
[ 3.420120] ff000000.serial: ttyPS0 at MMIO 0xff000000 (irq = 40, base_baud = 6249999) is a xuartps
[ 3.429144] printk: console [ttyPS0] enabled
[ 3.429144] printk: console [ttyPS0] enabled
[ 3.433439] printk: bootconsole [cdns0] disabled
[ 3.433439] printk: bootconsole [cdns0] disabled
[ 3.442741] ff010000.serial: ttyPS2 at MMIO 0xff010000 (irq = 41, base_baud = 6249999) is a xuartps
[ 3.456186] of-fpga-region fpga-full: FPGA Region probed
[ 3.462479] xilinx-zynqmp-dma fd500000.dma: ZynqMP DMA driver Probe success
[ 3.469595] xilinx-zynqmp-dma fd510000.dma: ZynqMP DMA driver Probe success
[ 3.476708] xilinx-zynqmp-dma fd520000.dma: ZynqMP DMA driver Probe success
[ 3.483824] xilinx-zynqmp-dma fd530000.dma: ZynqMP DMA driver Probe success
[ 3.490945] xilinx-zynqmp-dma fd540000.dma: ZynqMP DMA driver Probe success
[ 3.498063] xilinx-zynqmp-dma fd550000.dma: ZynqMP DMA driver Probe success
[ 3.505183] xilinx-zynqmp-dma fd560000.dma: ZynqMP DMA driver Probe success
[ 3.512297] xilinx-zynqmp-dma fd570000.dma: ZynqMP DMA driver Probe success
[ 3.519490] xilinx-zynqmp-dma ffa80000.dma: ZynqMP DMA driver Probe success
[ 3.526604] xilinx-zynqmp-dma ffa90000.dma: ZynqMP DMA driver Probe success
[ 3.533721] xilinx-zynqmp-dma ffaa0000.dma: ZynqMP DMA driver Probe success
[ 3.540839] xilinx-zynqmp-dma ffab0000.dma: ZynqMP DMA driver Probe success
[ 3.547953] xilinx-zynqmp-dma ffac0000.dma: ZynqMP DMA driver Probe success
[ 3.555083] xilinx-zynqmp-dma ffad0000.dma: ZynqMP DMA driver Probe success
[ 3.562198] xilinx-zynqmp-dma ffae0000.dma: ZynqMP DMA driver Probe success
[ 3.569321] xilinx-zynqmp-dma ffaf0000.dma: ZynqMP DMA driver Probe success
[ 3.576401] 80000000.serial: ttyUL1 at MMIO 0x80000000 (irq = 43, base_baud = 0) is a uartlite
[ 3.585493] zynqmp-qspi ff0f0000.spi: rx bus width not found
[ 3.591148] zynqmp-qspi ff0f0000.spi: tx bus width not found
[ 3.596965] spi_master spi0: cannot find modalias for /amba/spi@ff0f0000/flash@0
[ 3.604361] spi_master spi0: Failed to create SPI device for /amba/spi@ff0f0000/flash@0
[ 3.612780] macb ff0d0000.ethernet: Not enabling partial store and forward
[ 3.620199] libphy: MACB_mii_bus: probed
[ 3.624725] RTL8211F Gigabit Ethernet ff0d0000.ethernet-ffffffff:00: attached PHY driver [RTL8211F Gigabit Ethernet] (mii_bus:phy_addr=ff0d0000.ethernet-ffffffff:00, irq=POLL)
[ 3.640372] macb ff0d0000.ethernet eth0: Cadence GEM rev 0x50070106 at 0xff0d0000 irq 29 (00:0a:35:00:22:01)
[ 3.650459] zynqmp_pll_disable() clock disable failed for dpll_int, ret = -13
[ 3.657702] xilinx-axipmon ffa00000.perf-monitor: Probed Xilinx APM
[ 3.664234] xilinx-axipmon fd0b0000.perf-monitor: Probed Xilinx APM
[ 3.670736] xilinx-axipmon fd490000.perf-monitor: Probed Xilinx APM
[ 3.677243] xilinx-axipmon ffa10000.perf-monitor: Probed Xilinx APM
[ 3.684015] cdns-i2c ff030000.i2c: 100 kHz mmio ff030000 irq 31
[ 3.690344] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 1066666 KHz
[ 3.697789] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 1199999 KHz
[ 3.738190] mmc0: SDHCI controller on ff160000.mmc [ff160000.mmc] using ADMA 64-bit
[ 3.777653] mmc1: SDHCI controller on ff170000.mmc [ff170000.mmc] using ADMA 64-bit
[ 3.787911] rtc_zynqmp ffa60000.rtc: setting system clock to 2002-01-01T01:00:21 UTC (1009846821)
[ 3.796778] of_cfs_init
[ 3.799242] of_cfs_init: OK
[ 3.802146] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 3.837283] mmc0: new HS200 MMC card at address 0001
[ 3.842650] mmcblk0: mmc0:0001 Q2J55L 7.09 GiB
[ 3.847372] mmcblk0boot0: mmc0:0001 Q2J55L partition 1 16.0 MiB
[ 3.853483] mmcblk0boot1: mmc0:0001 Q2J55L partition 2 16.0 MiB
[ 3.859525] mmcblk0rpmb: mmc0:0001 Q2J55L partition 3 4.00 MiB, chardev (245:0)
[ 3.867999] mmcblk0: p1 p2
[ 3.955124] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 3.961650] clk: Not disabling unused clocks
[ 3.965914] ALSA device list:
[ 3.968872] No soundcards found.
[ 3.972572] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[ 3.981187] cfg80211: failed to load regulatory.db
[ 4.004720] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[ 4.012838] VFS: Mounted root (ext4 filesystem) on device 179:2.
[ 4.019427] devtmpfs: mounted
[ 4.022555] Freeing unused kernel memory: 704K
[ 4.027038] Run /sbin/init as init process
INIT: version 2.88 booting
[ 4.167623] random: fast init done
Starting udev
[ 4.268071] udevd[162]: starting version 3.2.8
[ 4.276789] random: udevd: uninitialized urandom read (16 bytes read)
[ 4.283614] random: udevd: uninitialized urandom read (16 bytes read)
[ 4.290468] random: udevd: uninitialized urandom read (16 bytes read)
[ 4.313584] udevd[163]: starting eudev-3.2.8
[ 4.377348] ch423: loading out-of-tree module taints kernel.
[ 4.384487] ch234 module init
[ 4.416119] pltops module init.
[ 4.419462] pl to ps irq0=44
[ 4.422369] pl to ps irq1=45
[ 4.425269] pl to ps irq2=46
[ 4.710825] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 4.791227] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
Hello PetaLinux World
///Starting gtz10app and algorithmapp
[ 5.004787] spi flash module init.
///Starting gtz10app and algorithmapp
INIT: Entering runlevel: 5
Configuring network interfaces... [ 5.102610] pps pps0: new PPS source ptp0
[ 5.106657] macb ff0d0000.ethernet: gem-ptp-timer ptp clock registered.
done.
Starting haveged: haveged: listening socket at 3
haveged: haveged starting up
Starting Dropbear SSH server: dropbear.
Starting internet superserver: inetd.
Starting syslogd/klogd: done
Starting tcf-agent: [ 6.026159] random: crng init done
[ 6.029563] random: 6 urandom warning(s) missed due to ratelimiting
OK